High Speed Stirrer for Ceramic Glaze and Slip for Sanitary Ware CMC

• Customization: Available
• Rpm: 120-1400rpm
• Lifting Height: 1000mm
• Model NO.: AG-CMC
• Max Height: 1600mm
• Power: 7.5kw
• Stirring Shaft: 304 Stainless Steel
• Invertor: Siemens
• Transport Package: Wooden Case by Sea Transport
• Specification: high speed mixer
• Trademark: HEXIANG
• Origin: China
• HS Code: 8474390000
• Production Capacity: 30sets/Month

Product Description

Product Description

High speed dispersion machine is high-efficiency equipment for stirring, dissolving and dispersing various liquids. They will be widely used in coatings, inks, plastics, adhesives, papermaking, rubber, mixed paints, fillers and solvents.

Machine structure

 

Hydraulic lifting part:
It is composed of oil cylinder and piston mandrel.
The rotating part of the main engine:
In the transmission box, the main motor drives the main shaft through a pulley.
Choose Siemens frequency to control speed.
 

 

Working principle

Put the material into the pull cylinder, raise the main shaft of the disperser, place the pull cylinder on the disperser, and lower the main shaft to perform low-speed and high-speed rotation and dispersion. When running at high speed, the peripheral speed of the toothed impeller can reach 25 m/s, and the material will be violently turned up and down in the container, and it will collide and shear with the impeller to destroy the aggregates and achieve the purpose of rapid dispersion and uniform mixing.

Product Parameters

power	7.5kw
Rev	120-1400rpm
Central distance	850mm
Maximum Length	1600mm
Installation height	1955mm
Up	1000mm
Dispersion disk diameter	260mm
Go down until bottom from ground	275mm