| Customization: | Available |
|---|---|
| Working Table: | Can Lift |
| Suitable Size: | Height 710mm Toilet |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
This lapping and grinding machine for water closet is used for high-speed grinding the contact surface between sanitary ware (such as toilet, face washer, etc.) and the ground or table, so as to make it contact more smoothly and improve the quality of products. It is indispensable equipment for the production of high-grade sanitary ware.
| Model | 150 grinder |
| Type of drive: | chain transmission |
| Motor of abrasive wheel: | Y90L-2 2.2kW 2840r/min (electrical standard: 380V, 3P, 50HZ), Brand: Hebei Mengniu |
| Motor of lifting: | Y90L-6, 1.1kW 910r/min, Brand: Tianjin speed reducer |
| Diameter of abrasive wheel: | Ø150mm |
| Materials of abrasive wheel: | Diamond, Brand: Monte. Biance |
| Rotate speed of abrasive wheel: | 2840r/min; Linear speed: 22.3 m/s |
| Speed ratio: | i=1:12 |
| Overall dimension: (L x W x H) | 1825×1260×2070mm |
1. Grinding
The motor transmits the power to the grinding wheel through the coupling to make it rotate at a high speed. The cooling water flows down the water hole of the grinding wheel through the water injection device at the bottom of the grinding wheel to the sanitary ware to be ground. Under the high-speed rotation of the grinding wheel, the water moves tangentially along the grinding wheel to achieve Cooling and dust-proofing of the sanitary ware of which is to be polished.
The movement of the grinding wheel adopts a structure in which two rocker arms are hinged in the middle, and the other rocker arm swings along the vertical axis, so that the grinding wheel can achieve a universal effect, thereby grinding any position of the work-piece.
2. Workbench lift
The lifting of the worktable is realized manually or electrically. Move the switch handle on the front of the machine to the electric position, and the control button can be used to operate the lifting of the worktable. When the worktable is moved to the upper (or lower) stroke near the end, the stroke switch will automatically Cut off the power supply. Move the handle to the manual position, you can turn the hand-wheel by hand to realize the lifting of the worktable. Special attention: When the handle is in the manual position, the worktable cannot be controlled by electric power.
3. Water cooling
The cooling system of this machine is composed of a water storage tank and a circulating water pump. First, fill the water storage tank with cooling water, press the water pump start button, the water pump sends the water in the water storage tank to the head of the grinding wheel, overflows in the tangential direction of the grinding wheel, and flows into the inner water tank together with the grinding porcelain chips, and is collected by the inner water tank, the water flows into the water storage tank through outlet pipe on the left side of the machine. After grading and sedimentation in the water storage tank, the water flows into the pump pool and is pumped to the grinding wheel, so that the cooling water is recycled.
){kind=link}