Direct Heat Blaster with High Efficiency Burner From England

• Dryer Time: 14-18 Hours
• Firing Fuel: Natural Gas
• Casting Workshop Temperature: Above 40 Degree
• Full Pressure: 340PA
• Burner Brand: Comtherm
• Transport Package: Container by Sea Transport
• Model NO.: BL-DC
• Specification: Direct blaster heater
• Trademark: HEXIANG
• Origin: China
• HS Code: 84193910
• Production Capacity: 30sets/One Year

Product Description

Product Description

Direct-fired gas hot blast heater is a special industrial furnace that uses gas (liquefied petroleum gas, natural gas and city coal gas) as fuel, air as a carrier, and transfers heat energy to heating equipment through centrifugal fans.
It is especially suitable for the drying of large-scale green bodies in the ceramic industry and has been adopted by many ceramic industry manufacturers.

Detailed Photos

Machine structure

 

The direct blaster heater includes the following parts:
Combustion engine: equipped with Britain COMTHERM combustion engine with big fire & small fire output
Furnace chamber: Including furnace cavity, air inlet, air outlet
Centrifugal blower (exhaust fan)
Electric control system
Checking platform

Products characteristics

1)High efficiency

Using high-efficiency burner, high thermal efficiency, structurally, the thermal efficiency is better than the indirect hot blast stove, and the thermal efficiency is close to 100%
2)Energy conservation
A heat-resistant glass observation window is installed on the burner shell to facilitate the operator to observe the flame status, integrated design, simple installation and convenient operation
3)Easy to maintain
All parts of the burner, including the combustion head, can be individually disassembled and replaced without disassembling the whole machine. The combustion head, ignition electrode and flame detection electrode can be adjusted and disassembled and replaced at the panel of the burner enclosure.
4) Slight smoke pollution
Due to insufficient combustion of the burner, the emitted hot air will contain slight smoke and dust, but the use of a high-efficiency burner can greatly alleviate this shortcoming.

Product Parameters

Technical parameters	Unit	Data	Remark
Temperature	ºC	Normal temperature-45ºC
Drying cycle	Hour	8-18
Work ambient	ºC	Temperature ≤50ºC
Relative humidity	%	R.H≤85%
Burner type		Britain COMTHERM

    

Certifications

 

Company Profile

 

After Sales Service