| Customization: | Available |
|---|---|
| Casting Bench Length: | 18-30m |
| Mold: | Plaster Mold |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The hydraulic lifting casting machine for one piece water closet is mainly divided into the main frame part, bottom mold lifting part, compressed air belt part, hydraulic lifting part, transmission shaft part, auto de-mold trolley part, powered roller conveyor line, infrared automatic monitoring and release system, micro pressure system, end control system and travel switch combination, automatic slurry supply and discharge system, fan hanger, lamp frame, air duct device, etc .
| Parameter | Unit | ||
| Ground Line Length | M | 22 | Depends on customer capacity |
| Top line Length | M | 5180/5920 | |
| Width | MM | 2670 | |
| Height | MM | 3016 | Maximum Height |
| Length of Storage Platform | M | 21 | |
| Width of Storage Platform | MM | 650 | |
| Height of Storage Platform | MM | 520 | |
| Size of Whole Line | mm | 2200×4300×3400 | Line size only |
| Molds Available | set | 8-30 | depends on the size of the molds and productivity needs |
| Ground Incline Max. adjustable angle | ºC | 25 | |
| Ground Incline adjustable angle | ºC | 0-20 | |
Power |
kw | 2.2 | Power of Main Motor |
| kw | 2.2, Ø400mm | ||
| kw | N/A | Power of Lights | |
| kw | N/A | Power of Fans | |
| Air Pressure | MPa | ≥0.6 | |
Installation Ground Needed |
Length(M) | Line quantity*3.6 | 3.6meter for each line |
| Width(M) | 4.5 | ||
| Width(M) | 21+2 | Minimum width needed | |
| Width(M) | 21+2+3 | Minimum width for casting line running |
(1) High automation
The one piece hydraulic lift casting line is equipped with an electric control box, which can set the feeding parameters, and automatically complete the grouting, discharging, micro pressure and other operations, with a high degree of automation.
Few operators needed, lowers the working intensity and saves cost.
After slip feeding, the hydraulic lifting system is used to open and close the bottom mold of the gypsum model, and the over-turning car is used to start the turning operation. Each line only needs two people to operate, which reduces the number of molding operators, reduces the labor intensity, and reduces the production cost of the product.
(3) Easily operate
The battery hydraulic casting line equipped with a control system, which can set parameters easily.
){kind=link}